Post by BroJames on Jan 22, 2008 18:16:36 GMT -5
YT-0003S Micro Pocket Charger
Intelligent balancer Charger
--Instruction--
1. Preface:
YT-0003S charger is special design for lithium polymer, lithium-ion battery 2 and 3cells by YUNTONG.
2. Characteristics:
2.1. With professional charge IC control, high charge efficiency and precision.
2.2. Check 2 or 3cells good or not automatic and switch itself to charge 2cells or 3cells
2.3. Green and red two color LED, red for power, green for charging.
2.4. Input voltage is from 10 to 18V DC, but 12-16V is better. Even it can use car chargers.
2.5. Output voltage: 2S:8.4V, 3S:12.6V; Output current: 1.1A
2.6. Balance voltage is about 30mV
2.7. Output wrong polarity protection
2.8. Output short-circuit protection
2.9. Can not charge 2cells and 3cells same time, only charge 2cells or 3cells one time.
2.10: Size (thickness x width x length): 23.5x53x81.5mm; weight: 53g or so
Intelligent balancer Charger
--Instruction--
1. Preface:
YT-0003S charger is special design for lithium polymer, lithium-ion battery 2 and 3cells by YUNTONG.
2. Characteristics:
2.1. With professional charge IC control, high charge efficiency and precision.
2.2. Check 2 or 3cells good or not automatic and switch itself to charge 2cells or 3cells
2.3. Green and red two color LED, red for power, green for charging.
2.4. Input voltage is from 10 to 18V DC, but 12-16V is better. Even it can use car chargers.
2.5. Output voltage: 2S:8.4V, 3S:12.6V; Output current: 1.1A
2.6. Balance voltage is about 30mV
2.7. Output wrong polarity protection
2.8. Output short-circuit protection
2.9. Can not charge 2cells and 3cells same time, only charge 2cells or 3cells one time.
2.10: Size (thickness x width x length): 23.5x53x81.5mm; weight: 53g or so